If that doesn't work, then they will need to see if the actuator is working for the blend air door, and if the that is ok, then check the door itself When I'm driving, cool/cold air comes through the vents in all positions. Sign in 314 19 Don't like this video? NOTE : MARK LOCATION OF PLASTIC EXTERNAL STOP POSITION ON THE BLEND AIR DOOR SHAFT FOR REINSTALLATION. 8. have a peek here
dynoegg 256,422 views 8:53 2002 Dodge Grand Caravan Sport Heat Core Replacement - Duration: 11:02. 2002dodgegrandcaravanrepair 51,079 views 11:02 Changing the fan relay on a Dodge Caravan - Duration: 11:19. The blend door actuator (motor) tested good, but the shaft it connected to on the heater box was loose inside the heater box. He calls it a valve, but he means the controlCustomer: I was just talking to him, the relay messagesStonyman : Oh, I see. And since I paid slightly more than 5 grand for this van a little more than 5 years ago, sinking 1500 bucks into it didn't seem like a good investment nor https://www.ifixit.com/Answers/View/94848/fan+works+but+no+heat+comes+into+cabin.+Troubleshooting+ideas
Tighten screws to 2 Nm (17 in. First try to do the calibration on the heater system. Remove the heater core shield from the distribution housing. 7.
Loading... RepairPal® RepairPal Certified® let's makeExplore PublishClassesLogin|Sign Upshare what you makeFeatured:Intel IoTLEDsCostumesWith Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.How it What can it be and is it an inexpensive fix? 2000 Dodge Caravan Blend Door Actuator If it has been a long since you have done this, maybe it is very dirty and clogged.
Troubleshooting ideas? 2005 Dodge Grand Caravan Heater Not Working RepairPal® RepairPal Certified® Close RepairPal Get Your Car Fixed Learn About Your Car About RepairPal For Shop Owners RegisterSign That can tell you if the control valve is bad.Stonyman : THis shouldn't have a heater control valve unless someone put one on it.
This van is a 2002.
Turn the ignition switch to the ON position. How To Replace Blend Door Actuator Dodge Caravan Mark helpful 60 Report hosehead answered 5 years ago Hi Jonathan it was the water pump. Working... So cutting into the heater box would cost me nothing as the whole thing would be replaced if I couldn't fix it and had to go the "correct" route to have
The gear on the actuator should only do about 30% of a rotation, mine was somewhere around 110%! Skip navigation UploadSign inSearch Loading... Dodge Caravan Heater Not Working Where is the valve you are talking about located?Customer: Thermostat is opening, hoses are hot all around, so is the radiator. Dodge Caravan Blend Door Repair Thanks for your help 4 out of 4 people think this is helpful.
If I shut it off for a little bit and turn it on it blows hot. navigate here please help.... lbs.). 15. I need to determine if the switch or the fan motor is not working. Dodge Caravan Climate Control Problems
Mark helpful 40 Report Tsban answered 10 months ago Strange but true,do not turn your fan motor on high for the first 10 minutes-Dodge Tech. 4 out of 4 people think Answered! Was this answer helpful? Check This Out The blend door actuator cannot be adjusted or repaired and, if damaged or faulty, it must be replacedStonyman : Full Size ImageStonyman : 1 - SCREW (2)2 - MODE DOOR ACTUATOR3
But having already visited the same junk yard I had just the van in mind to get a replacement door from. 2003 Dodge Caravan Blend Door Replacement After searching the entire net, your post saved me a lot of money. He believes the bar is the problem because it's not there.
I'm so happy to hear you were able to find and benefit from this Instructable!!
ZooSplash 196,676 views 4:51 2002 Dodge Grand Caravan Sport Heat Core Replacement - Duration: 11:02. 2002dodgegrandcaravanrepair 51,079 views 11:02 Electric fans not working on A/C air conditioning - Duration: 2:37. Gaspar M 29,248 views 11:19 Test Dodge Caravan Blower Motor and Resistor without a volt meter - Duration: 3:10. And I still couldn't find a fix or anything else to try, then I came across this post on flicker of someone who had gone through the process of removing their 2002 Chrysler Town And Country Heater Problems If the actuator is bad you can replace it with out removing the dash.
Add your comment to this topic! I started by cutting out a square slightly larger than the shaft opening around the shaft of the blend door in the side of the heater box by the drives side Cancel James Tucker Rep: 1 Posted: October 26 Options Permalink History mine is a 2011 chrysler 200 and replaced both actuator switches now need to recalibrate it as most of my this contact form Battery Geek 142,788 views 7:45 Dodge Caravan Heater RearHose Replacement - Duration: 8:39.
Loading... Sign in Share More Report Need to report the video? c. not sure this 'fix' will apply.
Preview my answer Post my answer View Statistics: Past 24 Hours: 163 Past 7 Days: 912 Past 30 Days: 4,011 All Time: 60,442 22,556 Free Manuals 89,301 Solutions 6,837 Devices iFixit The calibration procedure should take less than three minutes to complete for the manual system, and less than twenty seconds for the ATC system. Should I hack in and try to fiddle with its intestines?
Thanks for any ideas.
I'm not a mechanic, but did a quick google search and it looks like the 98 has a I would watch the actuator and see if it operates(moves and turns the blend air door).
Actuator is the good one - temperature dial moves it. Install the new blend door shaft through the blend air door and into the housing. 10. do you know how much that would cost me?Stonyman : The last time I did one it was about 75 for the part and an hr or two for the labor.Customer: The other one is for windshield/face/legs and works as well.
fuel was 11/9/2016 11/9/2016 roybelding X Ask a Dodge Mechanic Get a Professional Answer. 100% Satisfaction Guaranteed. 36 Dodge Mechanics are Online Now Type Your Dodge Question Here... should be the looking for the mode door, not the zone door...
Thanks for reply. I even cleaned the joints etc with brake cleaner.
When putting the door back in, was it easy to get the far end back in the pivot?
My cut out didn't go as This is a dangerous condition as you can potentially overheat and damage your water pump and/or engine.
As it turns out my climate control module was at fault for the blend door breaking. If the door is broken, you'll need to remove the dash and replace the door.Customer: Ok.