Fuel gauge shows empty with light on. Is this possible? i hava a 3 gallon gas can filled and sealed in the back, just in case. After the buzzer stops, release the trip switch. 5.Press the trip switch one more time and hold for 5 seconds. this contact form
Unanswered Browse Forums by: Make Acura Alfa Romeo AM General Aston Martin Audi Bentley BMW Bugatti Buick Cadillac Chevrolet Chrysler Daewoo Dodge Eagle Ferrari FIAT Fisker Ford Genesis Geo GMC Honda maybe pick up a bottle, b/c i am having some fuel guage problems. --Jared norflaballer, did you get a chance to use the fuel sensor cleaner yet? or it's affiliates. The harness lead to the sending unit cover is then attached to the spade connector.
Question about Toyota Camry 1 Answer I have a 2002 camry. Worked like a charm on mine, hopefully it will work on yours too! I think it's part of the fuel vapour evap mechanism, so after it's done, it would drop. One black lead (Ground) and the other is a red lead (Signal) I OHM tested each lead from the sender unit itself to the plug in harness that attaches to the
This past weekend I decided to look into the problem myself. Thank you, I did notice on the drive in to work this morning that my gas gauge is still on 3/4 of a tank. if so, does it work? 06-28-2006, 07:24 AM #24 2000t4r Registered User Join Date: Nov 2004 Location: Norcal Posts: 366 Quote: Originally Posted by Ringmaster My gas gauge How To Test A Fuel Gauge Sending Unit The gauge would read full when the tank was filled but only drop to a point just below the 3/4 mark and stay there.
Tyrone Williams 44,162 views 4:13 Fix A Ford Gas Gauge That Always Reads Empty - The Anti Slosh Bypass - Duration: 5:41. Fuel Gauge Not Reading Correctly I noticed mine is doing what yours is too. Find a 3.4 watt light bulb and connect between the Yel/Blue and Brown wires. http://www.justanswer.com/toyota/86jgb-toyota-camry-fuel-gauge-2010-toyota-camry-stuck.html My fuel gauge over the last couple of months has become very erratic.
I hadn't heard of the trip meter thingy... Fuel Gauge Reading Empty When Tank Is Full Everything else works. The problem is you can force liquid fuel into the evaporative emissions system and damage the carbon canister. Scotty Kilmer 389,841 views 2:59 How to Remove your Fuel Pump / Sending Unit - Duration: 6:59.
then see. http://forums.edmunds.com/discussion/31489/toyota/camry-hybrid/fuel-gauge-problems-camry The Toyota, Lexus and Scion names and logos are trademarks owned by Toyota Motor Sales, USA, Inc. My Fuel Gauge Is Not Working I guess now I have to see how I pull out the rear seat. Fuel Gauge Reading Incorrectly Anyone know how to fix this one?
I contacted the local dealership and talked to a mechanic that said I needed to buy a fuel sending unit for $245 US. weblink This changes resistance based on temperature. Working... alfredm8702 2011 Toyota Camry Gas gauge does not read properly always on full what could be the problem? Fuel Gauge Stuck On Full
If you remove the dash panel, the levelling sensor itself is the white plastic thingy mounted on the back side with 3 small wires connecting to the gauge PCB. I re-tested the OHM resistance and both units were identical in readings. Airtex/ASC Performance Pumps 196,478 views 3:46 Fuel Gauge Troubleshooting - Duration: 6:43. http://camtronics.net/fuel-gauge/1998-toyota-camry-fuel-gauge-not-working.html Yesterday 10:46 PM by Blogson 5 2 Attachment(s) Yet Another "Best...
Up next Gas gauge not working ? Fuel Gauge Stuck On Empty Once disconnected turn on ign key and determine if the fuel gauge now reads empty. My drive in is about 52 miles, so time will tell if the reset fixed my problem. 06-28-2006, 07:28 AM #25 MTL_4runner Contributing Member Join Date: Jul
no work has been done on the tank. Expert: George H. LinkBack LinkBack URL About LinkBacks Bookmark & Share Digg this Thread! There are two leads to the secondary fuel sender. Fuel Gauge Reads Full All The Time The TSB came out after I had given up on Toyota fixing it and I did not find it until my warranty was up.
replace the ... Does that activate the "gas low" light? #9 05-08-2010, 12:41 AM gib Junior Member Join Date: Apr 2010 Posts: 16 Out of curiosity I opened up the sender. Page 2 of 3 < 1 2 3 > Related Topics Thread Thread Starter Forum Replies Last Post tail light problems after replacing sockets gillesdetrail Pre 84 Trucks 6 07-17-2015 12:48 his comment is here I then OHM tested the secondary fuel sending unit and it checked out.
RAVWRENCH is offline Quote post #10 of 15 (permalink) Old 06-16-2014, 04:20 AM mr_rave Junior Member Country: Join Date: Sep 2011 Location: Brisbane, Australia Posts: 4 Thanks: 0 Thanked Everything else works. ...fuel gauge, speedometer, Cold / Hot gauge, and RPM gauges do not work and the odometer does not display. I tested the dash gauge first and it checked out. What I did notice is that the gas gauge is alot more stable.
Does or has anyone had this problem? MaxDoc Quote Remove Advertisements Sponsored Links RAV4World.com Advertisement post #2 of 15 (permalink) Old 06-13-2007, 05:12 PM RAVMAN Advanced Member Country: Join Date: Dec 1996 Location: Vancouver, Duh! #7 05-07-2010, 11:30 PM gib Junior Member Join Date: Apr 2010 Posts: 16 The gauge goes to zero with the wires disconnected and ign on, and I Loading...
I did a continuity check of the leads to the gauge and it was fine. I then soldered the ground wire to the top of the rivet that I cleaned off, where the lead runs through the secondary sender cover. Aaron Moldovan 98,290 views 5:35 "Fuel Sending Unit" Replacement Repair On 1997 Dodge Ram 2500 Cummins - Duration: 3:33. You may NOT copy or distribute the content that appears on this site without written permission from Fixya Ltd. © 2005-2015, Fixya, Ltd.
Log In Register Log In Remember Me? I was about ready to give up when I decided to test the sending units again only this time I left them in the tank and tested the OHM readings at Rich Brown 261,061 views 9:41 Fuel gauge not working quick fix - Duration: 4:13. Sign in Share More Report Need to report the video?
Done this many times. Once more the buzzer will sound for 1 second at 800HZ. I re-calibrated mine by sitting it on a hill to fake it out and make it think there was more gas in it than there was. The gauge would read full when the tank was filled but only drop to a point just below the 3/4 mark and stay there.