Home > Grand Prix > 2004 Pontiac Grand Prix Heads Up Display Not Working

2004 Pontiac Grand Prix Heads Up Display Not Working

Contents

I took the dash apart and pulled out the Heads Up Display. When the spring comes loose the mirror drops and the image is not displayed in the right position. Remove the light or sensor that connects the top to the bottom. from what i have seen its a horrible problem with a lot of the heads up displays that are pretty easy to fix. Check This Out

Remove the side dash panel that is between the door and the left side of the dash. Allow 3 hours for the repair, but it can be done in 2 hours. Category:Pontiac Share this conversation Expert: Dave Nova replied6 years ago. If you find them useful and they help you get your HUD back in order, please take a few minutes and express your appreciation by leaving me a TIP/DONATION in my http://www.atthetipwebs.com/technologyinstructions/hud.htm

2004 Grand Prix Heads Up Display Fuse

I have no idea where its located or how to change it. Dave Nova and 4 other Pontiac Specialists are ready to help you Ask your own question now Share this conversation Related Pontiac Questions Question Date Submitted Pete, I have a C0561 I believe it will make the information shine at the very top of the windshield.

Take the HUD apart. Vehicle is a 2004 pontiac grand prix - JustAnswer -Rianna Reply With Quote 04-29-2009 #7 John_Shughart View Profile View Forum Posts Private Message SE Level Member Join Date Mar 2008 Posts http://www.automotiveforums.com/vbulletin/showthread.php?t=216242&highlight=HUD+solder http://www.automotiveforums.com/vbulletin/showthread.php?t=953310&highlight=HUD+solder valente10-02-2009, 09:19 AMThank you for the great comments and welcome. Car Hud Can you send some pictures or a little more detailed.

Resolved Question: 2004 Gran Prix. How To Fix Heads Up Display In 2005 Grand Prix valente10-02-2009, 04:31 PMthank you for youre help valente10-04-2009, 08:01 AMI have a nother problem.i dont know if i should of started another post,but i think i should get this fix before I know there were issues with the older model (97-03) HID's and yours could have the same issue.

Reply With Quote 04-24-2009 #3 Rianna View Profile View Forum Posts Private Message SE Level Member Join Date Apr 2009 Location Arkansas Posts 4 Chats0 Re: Problems with my heads up

Looking forward up your write-up on it too. You can carefully pry around it with the flat tip screw driver. Ask Dave Nova Your Own Question Dave Nova, Pontiac Technician Category: Pontiac Satisfied Customers: 19450 Experience: ASE Master Certification. I'm assuming so since it is an 05.

How To Fix Heads Up Display In 2005 Grand Prix

You can do it now or after you put the mirror back in. http://www.grandprixforums.net/threads/12491-Problems-with-my-heads-up-display-04-gtp Once you have those 2 wires loose, lift the panel out of the car. 2004 Grand Prix Heads Up Display Fuse Install the bracket and secure the adjustment motor back in place. Grand Prix Hud Install I hope these instructions were helpful to you.

NOTE: Put everything back together in the reverse order. http://camtronics.net/grand-prix/04-grand-prix-heads-up-display-not-working.html The one that tilts and has the broken spring connected to the left side of it. To fix it, take out the HUD and drill a new hole in the plastic for the spring to connect to. Pull the door seal away a little to get your finger behind the cover, then simply pull it away from the top. Corvette Heads Up Display Repair

I'm at work. These instructions may also assist with the HUD display repair on similar cars as well, but are specific to the Grand Prix. valente10-05-2009, 07:55 AMCore sounds good to me. http://camtronics.net/grand-prix/2000-pontiac-grand-prix-heads-up-display-not-working.html It will come out pretty easy.

If it were my car, I think I would disconnect the radiator hoses from the engine and attempt to flush the radiator core out with maybe a garden hose. Same for the upper and lower radiator hoses. Okay, the heads up display is working but there is a spring retainer that is broken which is not allowing the display to shine up on the windshield where it belongs.

Every other button works just fine, except for adjusting the height back down.

Drill a hole in the bracket. If it were my car, I think I would disconnect the radiator hoses from the engine and attempt to flush the radiator core out with maybe a garden hose. Thanks. I had to slide it out towards the passenger side.

I took it to the stealership and they told me that since i have a after market stereo that it caused some sort of voltage spike that fried the heads up You'll probably need FSM wiring diagrams. Never had to do one. http://camtronics.net/grand-prix/2002-pontiac-grand-prix-heads-up-display-not-working.html Then do the same for the heater core hoses going into your firewall.

I have a small issue with mine. I try to detail all of the instructions I do to make them so a 10 year old could follow them. valente10-05-2009, 10:00 PMwhen i checked the heater core hoses i was in the garage so the bottom hose felt warm.but after i got back from work i decided to check them Credentials confirmed by a Fortune 500 verification firm.

It was a lot easier that I thought it was going to be." For details on removing the Heads Up Display, go to the following link. This repair cost me nothing but TIME because I had all the tools. I thought it wasn't working, but realized that if I slumped way down in the seat and looked through the steering wheel it was projecting. Take the clip loose and push the connector back a little so you can get the screw above it out.

I am not sure if the 04+ models have a water door in them or if coolant continuously circulates. NOTE: Be careful not to break the wires that connect to the alarm indicator and light sensor. I'll have to check it later. Do you have the digital climate controll unit?

You will need to remove the bracket to drill the hole in it.